View of a heavily forested valley from a high vantage point. In the foreground a radio is sitting on a gray metal camping table.

Operating while camping on Mt. Hood 7/31/2021

Hello all, it’s about time I wrote a post about my camping trip my partner and I took a couple weeks ago. I took my trusty Lab599 TX-500 kit, a couple 20W GoalZero Nomad solar panels, headset, and table/chair combo up camping with our “new” 4×4. I wanted to do some HF QRP and some handheld UHF/VHF operation while I was out. I brought some of the same portable furniture that I used at the beach last post since it worked out so well.

The view was pretty sweet for this one. The smoke from the wildfires made everything a bit more hazy but pretty great none-the-less.

View of a heavily forested valley from a high vantage point. In the foreground a radio is sitting on a gray metal camping table.
View while operating

While operating HF I made a number of contacts, and the solar panels kept the 4.5Ah Bioenno LiFePO4 battery built into the HF QRP radio kit charged the whole day. The first HF contact I made was with Stefan, AF6SA who was working POTA in Eldorado Natoinal Forest (K-4455). His signal was 5/6 on at about 450 miles away on 20m. I also made a contact with VA3AAA, Stanley in Ontario, Canada. I was pretty excited to reach Ontario with a low power radio. That contact was also logged on 20m. I also made a contact with the K0GQ radio club in MO on 20m. All of these contacts were made between 5 and 10w using the Trail-friendly EndFedz EFT-10/20/40 antenna strung between a couple trees about 50′ apart and about 25′ above the ground.

I switched radios and bands to see if I could get into some of the repeaters in the Portland area (I could) with my Yaesu FT3DR and a Signal Stick antenna. I ended up on 2m and caught two hams on 146.520Mhz doing a SOTA activation: K7AHR and K7IW. I think they were on Lookout Mountain, but I can’t remember and didn’t properly log it. I was running 5W for those contacts.

Tour of the radio setup at the camp site